genzler re/q eq dual pedal Genzler re/Q Dual Function EQ Bass Pedal

genzler re/q eq dual pedal Genzler re/Q Dual Function EQ Bass PedalThe re Q DUAL FUNCTION EQ PEDAL is a low noise, ALL ANALOG multi function HIGH PASS FILTER LOW PASS FILTER and 5 BAND EQ pedal that gives the player complete tonal control over the cut off of the extreme low and high frequencies, plus 5 bands of peak dip equalization. The filter section is foot switched independently from the EQ section, and there is additional make up gain or cut after the EQ for balancing levels or to act as an additional boost cut

The re/Q DUAL FUNCTION EQ PEDAL is a low noise, ALL ANALOG multi-function HIGH PASS FILTER - LOW PASS FILTER and 5 BAND EQ pedal that gives the player complete tonal control over the cut-off of the extreme low and high frequencies, plus 5 bands of peak-dip equalization. The filter section is foot switched independently from the EQ section, and there is additional make-up gain or cut after the EQ for balancing levels or to act as an additional boost/cut function when the EQ is switched into the signal path. The re/Q is also a great companion to the 4 ON THE FLOOR Classic Overdrive Pedal. It can be used to tailor your instrument's tone for various overdrive settings, or increased boost levels for any of the Overdrive gears.

There are a wide variety of uses for the re/Q and it's an excellent compliment to either the MAGELLAN 350 or MAGELLAN 800 bass amps.

Features:

• Lightweight Aluminum Chassis
• Rugged Stomp Switches
• Low-noise, Silent Switching Circuitry
• High-Pass and Low-Pass Filter
• 5 Band Fixed EQ Network
• EQ Output Level Control
• Accepts Power Supplies From 9VDC – 18VDC (low noise type), Either Polarity (auto detecting) 40mA Max — (Power Supply Not Included)
• Dimensions: 6”W X 4.1”D X 2.3”H
• Weight: 1.3 Lbs.

Specifications:

• Input Impedance: >1M ohm
• Output Impedance: 1k ohm
• HPF: 30Hz – 200hz
• LPF: 1kHz – 14kHz
• EQ Filter Points:
  
  • LOW: 90 Hz
  • LOW MID: 250Hz
  • MID: 630Hz
  • HIGH MID: 1.3kHz
  • HIGH: 2.6kHz
• EQ Band Control Range: +/- 12dB
• EQ Output Level Control Range: +/-9dB
• Input Sensitivity (nominal): -10dBu to -20dBu (instrument level)
• Input Level (maximum): 0dBu (9V supply), +5dBu (12V supply), +10dBu (18V supply)
• Output Level (nominal): -10dBu to -20dBu (instrument level)
• Output Level (maximum): +9dBu (9V supply) +14dBu (12V supply), +20dBu (18V supply)