ocd pedal versions Fulltone OCD V2.0 NEW VERSION
SKU: 16467792459
ocd pedal versions

ocd pedal versions Fulltone OCD V2.0 NEW VERSION

Sale price$24.98 Regular price$27.76
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ocd pedal versions Fulltone OCD V2.0 NEW VERSIONFulltone OCD V2 The OCD has received many slight tweaks since its birth in 2004, often incorrectly identified as version 2, Version 3, Version 4. In reality there has always been only one version Version 1, with very slight variations in a couple of values after that making them V1. 0 through V1. 8. All OCDs serial 205811 and higher are the new, less compressed versions some refer to as "v2. 01" What's stayed the same? The OCD was the first pedal to

Fulltone OCD V2
The OCD has received many slight tweaks since its birth in 2004, often incorrectly identified as “version 2, Version 3, Version 4.” In reality there has always been only one version...Version 1, with very slight variations in a couple of values ​​after that making them V1.0 through V1.8. All OCDs serial 205811 and higher are the new, less compressed versions some refer to as "v2.01"

What's stayed the same?
The OCD was the first pedal to use Mosfets as clipping devices. Another first was their configuration as "hard clippers connected to v-ref" instead of to ground, as was the norm. These things contribute greatly as to why the OCD has such touch-sensitivity...why they react so well when the strings are hit hard or soft, and why they sound & feel different than all other pedals out there, 90% of which are just slight tweaks of the Tube Screamer.

NEW FEATURE output buffer (when pedal is turned on in True-Bypass mode, or always when in Enhanced Bypass mode) which eliminates it from being influenced by effects that came after it. Translation, your sound remains consistent regardless of placement in today's more complex signal-chains, loopers, and pedalboards. This buffer also had a positive effect on the sound, it reduced loading on the pedal's hard-clipping stage, allowing more sustain of both the sound and the overtones.

NEW FEATURE Class A configured discrete 2N5457 JFET input section , raising the input impedance to 1 mega ohms (previously 330K) and increasing the dynamics...resulting in significantly better interaction with both single coil and humbuckers.

NEW FEATURE Internal switch to choose between " Enhanced Bypass TM" & True-Bypass, and with no popping sound in either mode. No other company offers EB...I invented it.

A downside to True-Bypass:
True-Bypass (TB) switching was the ultimate way to achieve a clean signal path for many years. Everything's different now, most guitarists have elaborate pedalboards with 10 or more pedals being the norm, and tremendous potential for signal and tone loss with the many cables, connectors, and other pedals involved in the chain. There can be so much signal loss that it sounds nothing like the sound of a guitar with a cable straight into the front of a great tube amp. Uninspiring.

What's the pedal industries' solution to this problem for the last 40 years?
Unity-gain buffered bypass…ie a couple of Field effect Transistors (FETs) configured as unity-gain buffers ala Boss, Ibanez, etc, etc.

What's the benefit to unity-gain FET buffered bypass?
It reduces the loading effect that occurs using long lengths of cable, and you remove the loud “popping” sound when switching the device on and off.

What's the issue with unity-gain FET buffered bypass?
Although my ears always told me that it sounded "tinny" and that there was signal loss, with the help of a my favorite Electronic Engineer (using some very expensive test equipment) we recently documented that each unity-gain FET buffer actually cuts the gain somewhere between 0.3 to 0.6 dB . This loss of gain is in the low-mids and bass frequencies, resulting in that "tinny" sound now that the highs remain and some of the bass and mids are gone. Now factor in that there are two FETs per pedal required to couple the IN & OUT path, that's an obvious loss of between 1dB-2dB per pedal.

What's an even bigger issue with this old style unity-gain FET bypass?
It kills dynamic pick response , ie it kills the difference between picking soft and picking hard...Yes, when the pedal is in bypass! This to me is a deal-breaker, and while I've always felt this to be the case, it's great to be able to actually see it on the scope.

What's the solution?
Enhanced Bypass ! Configuring both of the switching FET's Class-A! By configuring a FET for gain (also referred to as wiring it “Class-A“) all the dynamics return (and then some), even if you only configure it with the slightest amount of gain, in this case: 0.3 to .06 dB.

People rave about old EP-3 Echoplexes and Ep-3 type boosters, and although they know that they love what it does to the guitar's sound, they can't explain why. It's because of the Class-A FET preamp! With a Class A FET the dynamics get amplified, allowing an even greater range of expression than if you were playing through a guitar and just one cable straight into your amp. The downside with EP-3 preamps is that they throw the signal OUT-of-phase, boost treble, and cut bass. Fulltone's EB the signal exits the pedal IN-phase and doesn't change the EQ at all.

With OCD V2's Enhanced Bypass you get this benefit whether the pedal is turned ON or OFF.
This means that just having the OCD turned off in your signal chain makes the whole rig sound alive, fresh, and more powerful again.

Night & Day difference? You be the judge.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 16467792459

Discover Niche Categories That Outsell ocd pedal versions

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1483 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Linda F. Del Valle
Phoenix, US
★★★★★ 5
Love this ❤️❤️
Size: Standard (18-Inch), Color: Rose Pink
Love love super comfy soft yet firm Great quality good value the material is sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
R
Verified Purchase
RW
Lake Worth, US
★★★★★ 5
Heaven sent
Size: Jumbo (25-Inch), Color: Dark Grey
My back suddenly decided to show me who's the boss. This reading pillow has been a God send! It is substantial without being too hard, soft enough to be comfortable without being too soft, absolutely no lumps! The outside cover is removable to allow for machine washing and is so soft to the touch. There is a handle on the back that makes it easy to move. This has allowed me to be able to sit upright, much appreciated!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
S
Verified Purchase
Sonja Foster
Lake Worth, US
★★★★★ 5
Huge, super soft, cozy pillow!
Size: Jumbo (25-Inch), Color: Sage
This pillow is awesome! As a plus size person who can't sleep laying flat, the size and support level is perfect. This pillow is huge! The quality is very high, the stitching is precise, and the sage green material is soft and cozy. Great value for the price! I highly recommend this reading pillow!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
G
Verified Purchase
GN
Birmingham, US
★★★★★ 5
MUST BUY Item for Breastfeeding Moms
Size: Standard (18-Inch), Color: Dark Grey
MUST GET item for breastfeeding moms. It is a soft pillow with a removable washable cover. The material is like a suede, which can make it hot to lean on if you typically feel hot when breastfeeding or sleeping. It allows you to sit up straight while in bed with great support.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
M
Verified Purchase
Ms. Rea
Dallas, US
★★★★★ 5
It's perfect support.
Size: Extra Back Support (21-Inch), Color: Dark Grey
The best way to describe the super comfy reading pillow is super comfy. I use it to sit up while watching something soothing to my mind on tv and due to its comfyness and softness, it's perfectly just right for my back. The funny thing is within a few minutes I'm knocked out sleep, which is a good thing. It's soft but firm lumbar area and arms feels oh so comfortable. It gives the best sleep quality and less toss and turning. I highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026

recommand products