tarp tent setup with floor Ultralight Tarp Floor
SKU: 36983796599
tarp tent setup with floor

tarp tent setup with floor Ultralight Tarp Floor

Sale price$18.33 Regular price$20.37
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

tarp tent setup with floor Ultralight Tarp FloorDescription This tub floor works well with our 1P Cirriform Tarp (shown) and most a frame style tarps. Made from 20D Silpoly with a silicone coating on the outside and a PU coating on the inside. It's not the lightest for a good reason. We've selected this fabric for our floors because it is durable enough to be used without a separate footprint in most cases, and because it is significantly more puncture resistant than other fabric we've tried. If

Description

This tub-floor works well with our 1P Cirriform Tarp (shown) and most a-frame style tarps.

Made from 20D Silpoly with a silicone coating on the outside and a PU coating on the inside. It's not the lightest for a good reason. We've selected this fabric for our floors because it is durable enough to be used without a separate footprint in most cases, and because it is significantly more puncture resistant than other fabric we've tried. If you prefer a lighter silpoly with sil/sil coating, please contact us.

Setup is easy - clip the top corners of the tub clip to your tarp's corners using the included rigging (see the "rigging tab"). For additional protection, connect the midpoints on each side to a point above and tension to cocoon yourself.

Made in the USA from imported materials.

Specifications
Dimensions:
  • Width at head: 33" | 84cm
  • Width at foot: 25.5" | 65cm
  • Length: 86" | 218cm
  • Tub depth: 5" | 13cm
Material:

20D Silpoly

  • Coating: Silicone/PU
  • Hydrostatic Head (20D): >4000mm
Itemized weight:
  • Tub Floor: 4.4 oz | 125g
  • 4 Mitten hooks: 0.14 oz | 4g
  • 4 Tensionlocks: 0.16z | 4.5g
  • 12ft of 1/16" Shockcord: 0.28 oz | 8g
  • (a stuff sack is not included)
Rigging

The tub-floor is intended to be suspended from its top corners by clipping them out to your tarp's corners using the included rigging.


Overview

Included: Shock cord, tensionlocks, and mitten hooks

You'll attach rigging to the: top corners of the tub (4)

Cord length: For using the floor with a 1P Cirriform, cut the front cords (2) to about 36" and the rear cords to about 30". For other tarps, lay the floor under your pitched tarp. Then, measure the distance from the floor's corners to the tarp's associated corner. Cut the shock cord to about 70 - 90% of that length (the two front cords should be equal length, as should the two cords for the foot).


Install rigging at each corner
  • Using a girth hitch, install a tensionlock on the upper tie-out loop at each of the tub's corners.
  • Tie a mitten hook to the end of each cord. We like to use a clinch knot.
  • Thread the untied end of the shockcord through the tensioner as shown (first through the middle opening from bottom to top, then through the remaining hole from top to bottom).
  • Tie a loop in the untied end of the cord. We like like to use an overhand loop knot.
  • Repeat at each corner
  • Note: The images below show the 1P Bug Shelter, but the process is the same.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 36983796599

Discover Niche Categories That Outsell tarp tent setup with floor

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 894 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Christopher
Charlottesville, US
★★★★★ 5
Great edger for home use
This WORX 12 Amp Electric Lawn Edger did exactly what I needed it to do. It was easy to use, had plenty of power for cleaning up the edges around my driveway and sidewalk, and gave the yard a much cleaner, finished look. I like that it is corded because I do not have to worry about batteries dying, and it has enough power for regular homeowner use. The first pass took a little extra time since the edges needed cleaned up, but once I got going, it worked great. Overall, this is a solid edger/trencher for the price, and I would definitely recommend it for anyone wanting cleaner lawn edges without dealing with gas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
J
Verified Purchase
Jason
Fort Morgan, US
★★★★★ 5
Does the job!
Puts in the work! Knocked out my driveway no problem. Unsure about longevity but it’s great for a homeowner. Easy to assemble. Easy to use. Adjustment is nice along with the guide plate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026
B
Verified Purchase
B. Colonna
Houston, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
Omaha, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
Draper, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026

recommand products