mother in law snake plant Buy Mother in Laws Tongue Phoenix, AZ | Sansevieria
SKU: 42867491868
mother in law snake plant

mother in law snake plant Buy Mother in Laws Tongue Phoenix, AZ | Sansevieria

Sale price$22.12 Regular price$24.58
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

mother in law snake plant Buy Mother in Laws Tongue Phoenix, AZ | SansevieriaThe Toughest Indoor Outdoor Plant for Phoenix Homes Mother in Law's Tongue Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and

The Toughest Indoor-Outdoor Plant for Phoenix Homes — Mother in Law's Tongue

Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword-leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners — it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and total neglect, making it the perfect choice for busy Scottsdale homeowners, Mesa rental properties, Gilbert office lobbies, and Chandler covered patios where other plants give up.

Mother in Law's Tongue Plant Details

Attribute Detail
Scientific Name Sansevieria trifasciata (syn. Dracaena trifasciata)
Common Names Mother in Law's Tongue, Snake Plant, Sansevieria, Saint George's Sword
Mature Height 2–4 feet
Mature Width 1–2 feet (clumping, spreads by rhizomes)
Growth Rate Slow to moderate — 2–4 new leaves per year
Sun Full sun to deep shade. Tolerates any light condition.
Water Very low. Extremely drought-tolerant. Overwatering is the #1 killer.
USDA Zones 9–12 (Phoenix is Zone 9b–10a — protect from hard frost below 32°F)
Soil Well-draining required. Adapts to Arizona caliche soils with added sand or gravel.
Foliage Evergreen — stiff, upright sword-shaped leaves with green-yellow variegation
Bonus NASA-proven air purifier — removes formaldehyde, benzene, and xylene

Mother in Law's Tongue Uses in Phoenix Landscapes

Covered Patios & Shaded Entryways

Mother in Law's Tongue is the top pick for Phoenix covered patios, north-facing entries, and shaded courtyards where most plants struggle. The upright, architectural form adds clean modern lines to outdoor living spaces in Scottsdale, Paradise Valley, and Chandler. Group 3–5 plants in matching pots for a designer-look patio border, or plant directly in a shaded landscape bed along a covered walkway.

Indoor Accent & Office Plant

Snake Plant is one of the few plants that actually thrives in air-conditioned indoor environments. Place it in a bright window, a dim hallway, or a fluorescent-lit office in Mesa or Tempe — it performs in all conditions. Its air-purifying qualities make it a smart choice for bedrooms, home offices, and commercial lobbies across the Phoenix Valley.

Modern Desert Container Plantings

The bold vertical leaves of Sansevieria look striking in sleek concrete, ceramic, or metal planters. Use a single large specimen as a patio focal point, or line up matching containers along a Gilbert pool fence or Peoria outdoor kitchen. Container planting also makes it easy to move indoors during rare hard freezes.

Low-Maintenance Ground Cover & Border

Planted en masse in a shaded landscape bed, Mother in Law's Tongue creates a dense, low-water ground cover that never needs mowing. Space 12–18 inches apart for a filled-in border within 2 seasons. Works beautifully under Desert Museum Palo Verde trees or along shaded property walls.

Best Time to Plant Mother in Law's Tongue in Phoenix

Spring (March–May) is the ideal planting window. Warm soil and long days fuel rapid root establishment. Fall (October–November) is the second-best option. Avoid planting outdoors in winter — Sansevieria is frost-sensitive and should be protected or brought inside when temperatures drop below 32°F.

How to Plant Mother in Law's Tongue

  1. Dig wide, not deep — 2x the root ball width, same depth. Sansevieria has shallow rhizome roots.
  2. Ensure drainage — break through any caliche layer. Add coarse sand or perlite if soil holds water.
  3. Backfill with native soil — a 50/50 mix of native soil and coarse sand is ideal for in-ground planting.
  4. Spacing — 12–18 inches apart for a border or mass planting; 2+ feet for standalone specimens.
  5. No water basin — Sansevieria prefers to dry out quickly. Skip the soil ring.
  6. Gravel mulch — 2 inches of decomposed granite. Avoid organic mulch that traps moisture against the base.

Watering Mother in Law's Tongue in Phoenix

First Year Watering Schedule

  • Weeks 1–2: Water once, deep soak, then let soil dry completely before watering again (5–7 days).
  • Months 1–3: Every 10–14 days in warm months.
  • Months 4–12: Every 2–3 weeks. Let the top 2 inches of soil dry between waterings.
  • After Year 1: Every 3–4 weeks in summer; monthly or less in winter. Outdoor plants in shade may need no supplemental water in winter.

Drip Irrigation

Place 1 emitter (0.5–1 GPH) 6 inches from the base. Sansevieria is far more likely to die from overwatering than underwatering. If leaves turn mushy or yellow at the base, you're watering too much. When in doubt, skip a cycle. Indoor plants in pots should be watered only when soil is completely dry — typically every 2–4 weeks.

Can Mother in Law's Tongue survive outdoors in Phoenix year-round?
Yes, in most of the Valley. It thrives outdoors in covered, frost-protected areas. During rare hard freezes (below 32°F), either cover the plant with frost cloth or move containers indoors. In most Phoenix winters, it handles outdoor conditions just fine.

Is Snake Plant toxic to pets?
Yes, Sansevieria is mildly toxic to dogs and cats if ingested. It typically causes nausea and vomiting. If you have curious pets, place the plant on an elevated surface or choose a pet-friendly alternative.

How do I propagate Mother in Law's Tongue?
The easiest method is division — separate the rhizome clumps when repotting. You can also propagate from leaf cuttings placed in well-draining soil, though this takes 2–3 months to root. Division gives you an instant new plant.

Why is my Snake Plant not growing?
In Phoenix, the most common reasons are overwatering (causes root rot) and too much direct summer afternoon sun (causes leaf burn). Move to bright indirect light or morning sun, reduce watering, and growth should resume in spring.

You May Also Like

  • Elephant's Ear — bold tropical foliage for shaded Phoenix patios and entryways.
  • Flapjacks — another tough succulent with dramatic paddle-shaped leaves that pairs well with Snake Plant.
  • Blue Elf Aloe — a compact, colorful aloe that thrives in the same containers and landscape beds.
  • Ponytail Palm — an architectural indoor-outdoor plant with similar indestructible qualities.
  • Firestick Euphorbia — adds vivid color contrast next to Snake Plant's green-yellow foliage.

How Many Mother in Law's Tongue Do I Need?

Snake Plant clumps stay narrow, just 1 to 2 feet wide, and spread slowly by rhizome, so it is planted in groups for a border, a mass bed, or matching containers. Space plants 12 to 18 inches apart and they knit into a filled border within about two seasons. Use this table to size a shaded bed or border run.

Border / bed length Spacing 12 in Spacing 18 in
10 ft 10 plants 7 plants
20 ft 20 plants 14 plants
Container cluster 3 to 5 plants per large pot for instant fullness

Mother in Law's Tongue Season-by-Season in Phoenix

  • Spring (Feb to Apr): Best planting window. Warm soil and long days push 2 to 4 new upright leaves and any rhizome spread for the year.
  • Summer (May to Sep): Thrives in heat under cover or bright shade. Direct west afternoon sun can scorch the leaves, so give it morning sun or filtered light. Monsoon humidity is fine as long as the soil drains and the base dries out between waterings.
  • Fall (Oct to Nov): Good secondary planting season. Growth slows as nights cool.
  • Winter (Dec to Jan): This is the one weak spot. Sansevieria is frost-sensitive and leaves turn mushy below about 32F. Cover with frost cloth on freeze nights or grow it in pots you can pull under cover or indoors.

At a Glance

✔ Drought-Tolerant   ✔ Evergreen   ✔ Low-Maintenance   ✔ Pool-Friendly (Low-Litter)   ✔ Fire-Wise   ✔ Deer & Rabbit-Resistant   ✔ Spineless

Plant It With

  • African Spear: a cylindrical Sansevieria cousin that layers texture in the same shaded bed.
  • Elephant's Ear: bold broad foliage for a tropical, shaded-patio pairing.
  • Flapjacks: paddle-shaped succulent that contrasts the upright sword leaves.
  • Ponytail Palm: another tough, sculptural indoor-outdoor plant with the same care needs.

Is Mother in Law's Tongue Right for Your Yard?

Snake Plant is ideal for covered patios, north entries, shaded courtyards, and indoor rooms anywhere in the Valley, in fast-draining soil or a pot where the roots dry out between waterings. It is not a fit for an exposed west-facing bed in full afternoon sun, a low spot that stays wet, or a frost-exposed location you cannot cover in winter. It is also mildly toxic to pets if chewed, so keep it out of reach of curious dogs and cats.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 42867491868

Discover Niche Categories That Outsell mother in law snake plant

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1667 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
Z
Verified Purchase
zeel
Lowell, US
★★★★★ 5
Anyone with multiple monitors should buy this
I have been wanting something like this for years. I use three monitors, and keeping them all aligned is impossible. I've considered using tape, but that seems like it would lead to a sticky mess and it would never hold well. I imagined some solution with magnets, but never came up with anything that I thought I could implement myself. As soon as I saw this product, I was ordered two sets. I knew that this was either going to be a revolution, or a huge disappointment. It was not a disappointment. Installation is simple as can be, clean off your monitor back with some alcohol wipes (they should consider including some, would be a nice touch). For my screens, alignment was super easy because they have really square corners so I just stuck my aligners right at the corners and it worked great. For a screen with a curved back or something more geometric you probably want to get the screens in place first, then stick both parts at the same time. Either way, they stuck really well and the pads are flexible so they would work on a curved back just as well as flat. The brackets also have a locking part that allows you to slide them side to side a bit giving you more flexibility in mounting, and then you can lock them down once everything is lined up so they hold nice and firm. I also managed to screw up and put the wrong part on the wrong side, but luckily if you unlock the bracket you can slide the main part off of the adhesive part completely, so I was able to simply swap the two main parts without needing to peel the adhesive part off. It's a well thought out design and I was impressed by just how much flexibility there was in the mounting solution while still allowing for a very easy installation and rigid final setup. The magnets are strong, strong enough that if I needed to move a monitor regularly it would actually be annoying because while you can definitely take these apart they hold way too well to be doing so all the time. These are clearly intended for a permanent installation, without making it overly difficult to take things apart if you have to. If you have to turn a screen often though, such as to show something to a client or make the screen visible from another area of the room, I'm not sure if these will be what you need as they don't just come apart easily. If you want your screens to stay where you put them though, they are awesome! For me, these were perfect, and based on the design I think they should work well for most monitors and most setups. I'm so glad this product exists, it was well worth the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2025
J
Verified Purchase
Jimmy Mitchelll
Birmingham, US
★★★★★ 5
Great product!!!
I feel the price is a little high, but the product is amazing! Works just as described!!! I will be purchasing another set for the bottom of my work monitors. Currently their is just 1 set keeping these level.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
R
Verified Purchase
Ryan's Reviews
Phoenix, US
★★★★★ 5
I'd give 10 stars if I could
Holy cow! This is it! For YEARS I've been looking for a product that would align the bezels on my monitors. I found this product by scrolling through reels and then found the link to Amazon. The price was steep and I was hesitant, but I took the gamble and I'm so glad I did. Installation is slightly confusing, and you really want to know how this works before you adhere it to any surface. I'll break it down for you: Align your monitors flat next to each other. Attach one side with the adhesive, then snap the other side on with the magnet. Peel that adhesive strip and lay it on your second monitor so that they are even. Repeat for the bottom. Twist the U shape up for the left, down for the right. Adjust your angle and then lock them by putting the U shape back to how it was. That's it. The stability on these simple magnets is excellent. I went from a wobbly mount to locked in and only moving when I want it to. I'm so happy this product exists. That's German engineering for you. 💪💪
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
R
Verified Purchase
Richard G.
Grantham, US
★★★★★ 4
Works well...but the price!
I ordered two sets to connect 3 monitors together for a workstation at my job. These are well designed and the magnets are pretty strong. Installation is easy and it holds the alignment well. The only issue is the price. For what it is, the price is quite high. The value proposition would be much higher for those who need to be able to not have them aligned from time to time, such as rotating one around for others to see in an office. But if don't need to do this and just want alignment, there are much cheaper options. If you want to go the cheapest DIY route and it won't be seen, some popsicle sticks with two sided tape works well. You can crack them in the middle to act as a hinge.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
K
Verified Purchase
Kayla m
Natrona Heights, US
★★★★★ 5
Awesome product only thing that worked
I originally thought the Screen Buddy was overpriced, but after spending hundreds of dollars trying to perfectly align my monitors for sim racing, this is genuinely the only thing that has actually worked properly. Triple monitor alignment is one of the most frustrating parts of building a sim rig, especially with monitor arms constantly moving or sagging. This finally made everything line up the way I wanted. Expensive? Maybe. Worth it after all the headaches? Absolutely. Great job.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026

recommand products