james baroud markise 270 James Baroud side awning 200x270cm — Offgridconnection

james baroud markise 270 James Baroud side awning 200x270cm — OffgridconnectionJames Baroud side awnings give you extra space and room These smartly designed awnings with optional side walls can create additional dressing and living space and protect against sun and rain. The awning is available in three sizes. With an extension of 270 cm and a width of 200 or 250 cm for mounting on the side of the vehicle, and with an extension of 240 cm and a width of 130 cm for mounting on the rear of the vehicle. Both awnings to the side of

James Baroud side awnings give you extra space and room

These smartly designed awnings with optional side walls can create additional dressing and living space and protect against sun and rain. The awning is available in three sizes. With an extension of 270 cm and a width of 200 or 250 cm for mounting on the side of the vehicle, and with an extension of 240 cm and a width of 130 cm for mounting on the rear of the vehicle.

Both awnings to the side of the vehicle are made in such a way that a tent entrance can be fitted at any time. The corresponding opening can either be used as a passage without an entrance tunnel or closed so that it is wind and waterproof.
Two continuous C-rails are embedded in the vehicle's side profile. With these, assembly can be done very easily, e.g. with hexagonal screws and 90° angles.
To stow the awning, you must first fold the cross bars into the aluminum profile of the vehicle and the height-adjustable feet into the outer profile. The awning is then rolled up to the profile of the vehicle. For protection, a cover made of stable PVC tarpaulin is folded over the awning and closed with Velcro. A construction that is as simple as it is brilliant, like many of James Baroud's.

A set of three side walls with large windows and a door is available as an option for all three awning sizes. James Baroud has also found a clever solution to this. A semi-circular profile with a subsequent boiler rail is attached to the cross beam and the ceiling covering and the side wall are pulled into the boiler rail. This creates a wind and waterproof connection. The front wall is pulled into the tube rail on the front aluminum profile and connected to the side walls with a zip.
The rounded windows are a real eye-catcher and stand out clearly from the usual functional buildings. Due to its extraordinary size, it is pleasantly light and friendly inside. The windows, which are equipped with mosquito nets, can be closed opaquely if desired.