output buffer pedal Compatt/O™ BS2™ Buffer

output buffer pedal Compatt/O™ BS2™ BufferThe Compatt O is an op amp buffer, based on the Axess Electronics BS2 Buffer Splitter that was used by Eddie Van Halen, tweaked to our 2022 2023 specifications. Use a Compatt O as an input buffer by plugging your guitar directly into it. It will safeguard, strengthen, and prepare your guitar signal for whatever will follow on the pedalboard and in the rig. Use a Compatt O as a pedalboard's output line driver, after the last pedal, to drive the long

The Compatt/O™ is an op-amp buffer, based on the Axess Electronics BS2 Buffer/Splitter that was used by Eddie Van Halen, tweaked to our 2022-2023 specifications.

Use a Compatt/O™ as an input buffer by plugging your guitar directly into it. It will safeguard, strengthen, and prepare your guitar signal for whatever will follow on the pedalboard and in the rig.

Use a Compatt/O™ as a pedalboard's output line-driver, after the last pedal, to drive the long cable run to the back-line amp.

For the benefits of buffers, see our FAQ page.

• Input Impedance: 1M ohm
• Output Impedance: 50 ohm
• Dimensions: 3.72 x 1.56 x 1.28in. / 94.5 x 39.5 x 32.5mm
• Power Requirements: 9-18VDC 100mA via a 2.1 x 5.5mm barrel plug with a negative centre pin (like Boss pedals). Adapter not included.

User Manual and Wiring Diagrams (click to enlarge).