azor delay pedal Azor AP-313 Mini Looper – My Guitar Shop

azor delay pedal Azor AP-313 Mini Looper – My Guitar ShopThe Azor AP 313 is a super simple, easy to use mini looper pedal. The pedal has a 10 minute loop time and an unlimited amount over overdubs. When the pedal is plugged in and connected, press the footswitch once to begin recording the loop (the LED should go red). Press it again to stop recording and replay the loop that you just created (the LED should be blue at this point). You can then press the footswitch again, onto red mode, to record another

The Azor AP-313 is a super simple, easy to use mini looper pedal. The pedal has a 10 minute loop time and an unlimited amount over overdubs. When the pedal is plugged in and connected, press the footswitch once to begin recording the loop (the LED should go red).
 
Press it again to stop recording and replay the loop that you just created (the LED should be blue at this point). You can then press the footswitch again, onto red mode, to record another layer of the loop, and again into blue mode to mark the end of the loop. You can do this as many times as you want adding layers to the track.
 
Holding the foot switch when the blue LED is lit clears the previous recording. When there is no light visible the looper this means that it has no loop stored. When the blue led is showing, press the foot switch twice to pause the playback, and again to resume.

• Unlimited overdubs
  
• Undo/redo function
• High quality recording and playback
• Power Requirement: 9V DC center negative (9V power supply or battery --not included)
• Max.Recording time : 10 minutes
• Power requirement ; 9V center negative
• Current Draw; 100mA