Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cube e bike 500 watt motor VIVI Electric Bike 500W Brushless Hub Motor CoresPurchase Notes Before purchasing, please confirm the item label information on the upper and lower tubes or frames of your electric bike. If you purchased between 2021 and 2023, or if the model number on the frame label begins with "SPA~" (e. g., SPA000047, SPA000113, SPA000211), or if the model number on the frame label reads "M026TGB, MT20, Gopina V1, etc.", please select the SPA series frame series. If you purchased after 2024, or if the model
Purchase Notes
-
Before purchasing, please confirm the item label information on the upper and lower tubes or frames of your electric bike. If you purchased between 2021 and 2023, or if the model number on the frame label begins with "SPA~" (e.g., SPA000047, SPA000113, SPA000211), or if the model number on the frame label reads "M026TGB, MT20, Gopina V1, etc.", please select the SPA series frame series. If you purchased after 2024, or if the model number on the frame label begins with "AMAK~" (e.g., AMAK00016, AMAK00020, AMAK00028), or if the model number on the frame label reads "C26 UL, F26FUL, ACE01, APSVI11, GWLVI11, etc.", please select the AMAK series frame series. E-bike parts for these two frame series are incompatible, so please avoid purchasing the wrong parts.
- Please confirm the model of your electric bike before purchasing. The electric bike models shown in the details are the models currently on sale. If you cannot find the model you want, please contact our customer service email and purchase under their guidance to avoid purchasing errors. Due to different production batches and models, the item may differ from the description on this page. Please purchase according to the model on the page. The actual item received shall prevail.
- Before purchasing, please confirm your motor series. PLENTY series motors have the word PLENTY in white on the motor label. The TRUCK RUN motor has the words TRUCK RUN printed in black steel on the side of the motor. If you are unsure of your motor series, please contact our customer service email address and purchase under their guidance to avoid making a mistake.
Applicable Bike Model
The PLENTY (Located in the middle of the motor/white) 500W 48V brushless hub Motor Core is suitable for the following electric bikes:
The TRUCK RUN (Inlaid on the side of the motor/black) brushless hub Motor Core is suitable for the following electric bikes:
Product Details
| Color | Silver |
| Brand | VIVI |
| Material | Aluminum |
| Type | E-bike Hub Motor Core |
| Weight | 2.5-4.0kg/5.5-8.8lbs |
| Packing size | 30*25*20cm/11.8*9.8*7.8inches |
| Quantity | 1Pc |
Packing Contents
- 1 x Rear Brushless Hub Motor Core
-
1 x Included Motor Cable
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Thank you.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 157 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
★★★★★ 5
if you are going to be moving them a lot, buy something more sturdy.
Color: Black, Size: Wheel-6 Panel
I use these at our churchc.
They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places.
But they wqould work especially well if you were not constantly moving them as we do.
They are a bit of a pain to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
★★★★★ 4
Easy to put together , decent quality
Color: Black, Size: Wheel-6 Panel
Purchased for office, easy to put together , durable quality , exactly what we needed to partition a small space
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025
★★★★★ 5
Nice and sturdy
Color: Grey, Size: Wheel-8 Panel
Good privacy wall
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026