short cocktail dresses LaDivine CD0174 Sequin Fitted Prom Short Homecoming Cocktail Dress – The  Dress Outlet
SKU: 47635541485
short cocktail dresses

short cocktail dresses LaDivine CD0174 Sequin Fitted Prom Short Homecoming Cocktail Dress – The Dress Outlet

Sale price$18.50 Regular price$20.55
Save 10%
Size: 4

Pay in installments of $5.14 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

short cocktail dresses LaDivine CD0174 Sequin Fitted Prom Short Homecoming Cocktail Dress – The Dress OutletPlayful vibes come through in the Sequin Fitted Prom Short Homecoming Cocktail Dress by LaDivine CD0174, a short A line cut built for motion without weight. Not just stiff beauty, the beaded lace top holds shape but stays soft on the body. Instead of flat fabric, swirls of glitter tulle create bounce, building volume that flows when you move. Since it dances well, comfort isnt lost under sparkle. Slip these shoulder ties loose or tight, depending on

Playful vibes come through in the Sequin Fitted Prom Short Homecoming Cocktail Dress by LaDivine CD0174, a short A-line cut built for motion without weight. Not just stiff beauty, the beaded lace top holds shape but stays soft on the body.

Instead of flat fabric, swirls of glitter tulle create bounce, building volume that flows when you move. Since it dances well, comfort isn’t lost under sparkle.

Slip these shoulder ties loose or tight, depending on how you like it they shape the fit while bringing gentle texture near the plunging neckline. Inside, a full lining keeps things smooth and easy all day long. The cinched middle flows into a widening skirt, giving just enough structure without stiffness, perfect when the occasion sits between casual and dressed up.

Key Features:

  • Deep V-Neckline: Offers a sharp, open shape supported by a light bodice structure
  • Tulle Tie Straps: Provide an adjustable fit and a soft, visual accent at the shoulders
  • Beaded Lace Bodice: Adds texture and shine to the fitted upper half
  • Flared Glitter Tulle Skirt: Creates a lightweight, shimmering look that moves freely
  • Fully Lined Interior: Ensures the layered tulle remains comfortable against the skin

Available Colors:

Rose Gold, Smoky Blue, Champagne, Off White, Black, Emerald, Lavender, Silver

Perfect for Special Occasions!

A great match for homecoming, Sweet Sixteens, or any semi-formal party where you want a fun, high-energy look.

Details:

  • Silhouette & Fit: Short A-line with fitted bodice and flared skirt
  • Length: Above Knee Length
  • Fabric: Layered Tulle
  • Structure: Light bodice support
  • Back: V-back with zipper closure
  • Hem/Train: Short hem
  • Embellishment: Beaded lace and glitter finish
  • Sizes: XXS, XS, S, M, L, XL, 2X, 3X
  • Model Notes: Model is 5'8"
  • Occasion: Homecoming, Damas, Sweet Sixteen, Semi-Formal Parties

Care Instructions:

  • Dry Clean Only: Professional cleaning is required to protect the beadwork and glitter
  • Store on a Hanger: Helps keep the tulle layers fluffy and prevents crushing
  • Steam Carefully: Use a low-heat steamer to release wrinkles in the skirt
  • Handle with Care: Keep the lace bodice away from sharp jewelry to avoid snags

Shipping & Delivery:

  • Orders are packed and sent within 2–3 business days
  • Arrival is expected in 2–7 business days for most regions
  • You will receive a tracking number once your gown is on its way
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 47635541485

Discover Niche Categories That Outsell short cocktail dresses

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 123 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Steve M.
Houston, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Boise, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Bozeman, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Lexington, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024
T
Verified Purchase
Tommy Knapp
Whiting, US
★★★★★ 1
Unfinished product - doesn't work - waste of money
in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026

recommand products